Thermoplastic acrylic - POLYACRYL, AC-345AR60
This product is a copolymer of acrylic acid and acrylic and methacrylic acid esters.
Methacrylic resin for cold plastic markings - POLYACRYL, AC-810
Polyacryl AC-810 is a methacrylate resin, used for permanent cold plastic markings. Cold plastic materials based on Polyacryl AC-810 are permanently elastic, weather resistant and resistant to abrasion. It is used in combination with Polyacryl AC-810, which is amine pre activated. Binder contains paraffin which tends to float when stored for a long period of time at lower temperature. Therefore, the binder must be homogenized before use by stirring.
Methacrylic resin for cold plastic markings - POLYACRYL, AC-210
Polyacryl AC-210 is a methacrylate resin, used for permanent cold plastic markings. Cold plastic materials based on Polyacryl AC-210 are permanently elastic, weather resistant and resistant to abrasion. It is used in combination with Polyacryl AC-210, which is amine pre activated. Binder contains paraffin which tends to float when stored for a long period of time at lower temperature. Therefore, the binder must be homogenized before use by stirring.
Hot melt Resin - PI - 720
PI-720 resin is a resin with alkyd nature and 100% solid. This resin to be used with HET -200.
Plasticizer - HET - 200
HET - 200 is a plasticizer and lubricant with alkyd nature and with 100% solid. This plasticizer to be used with PI-720 resin in traffic paints and Hot melt adhesives.
Low Profile Resin - LP-200
LP – 200 is thermoplastic polymer solution in styrene, designed to be used as a low shrink additive.
Low Profile Resin - LP-100
LP – 100 is thermoplastic polymer solution in styrene, designed to be used as a low shrink additive.
Orthophthalic unsaturated polyester Resin - UP-961
UP – 961 is an Orthophthalic unsaturated polyester resin with moderate reactivity and viscosity with extremely flexibility. Also This resin has very low viscosity after curing.
Orthophthalic unsaturated polyester Resin - UP-964
UP – 964 is an Orthophthalic unsaturated polyester resin with moderate reactivity and consumer's required Viscosity.
Orthophthlaic unsaturated polyester Resin - UP 975
UP – 975 is an orthophthalic unsaturated polyester resin with medium viscosity, medium reactivity and mechanical properties. This resin has good UV resistance.
|
Thermoplastic acrylic - POLYACRYL, AC-345AR60
This product is a copolymer of acrylic acid and acrylic and methacrylic acid esters.
Methacrylic resin for cold plastic markings - POLYACRYL, AC-810
Polyacryl AC-810 is a methacrylate resin, used for permanent cold plastic markings. Cold plastic materials based on Polyacryl AC-810 are permanently elastic, weather resistant and resistant to abrasion. It is used in combination with Polyacryl AC-810, which is amine pre activated. Binder contains paraffin which tends to float when stored for a long period of time at lower temperature. Therefore, the binder must be homogenized before use by stirring.
Methacrylic resin for cold plastic markings - POLYACRYL, AC-210
Polyacryl AC-210 is a methacrylate resin, used for permanent cold plastic markings. Cold plastic materials based on Polyacryl AC-210 are permanently elastic, weather resistant and resistant to abrasion. It is used in combination with Polyacryl AC-210, which is amine pre activated. Binder contains paraffin which tends to float when stored for a long period of time at lower temperature. Therefore, the binder must be homogenized before use by stirring.
Hot melt Resin - PI - 720
PI-720 resin is a resin with alkyd nature and 100% solid. This resin to be used with HET -200.
Plasticizer - HET - 200
HET - 200 is a plasticizer and lubricant with alkyd nature and with 100% solid. This plasticizer to be used with PI-720 resin in traffic paints and Hot melt adhesives.
Low Profile Resin - LP-200
LP – 200 is thermoplastic polymer solution in styrene, designed to be used as a low shrink additive.
Low Profile Resin - LP-100
LP – 100 is thermoplastic polymer solution in styrene, designed to be used as a low shrink additive.
Orthophthalic unsaturated polyester Resin - UP-961
UP – 961 is an Orthophthalic unsaturated polyester resin with moderate reactivity and viscosity with extremely flexibility. Also This resin has very low viscosity after curing.
Orthophthalic unsaturated polyester Resin - UP-964
UP – 964 is an Orthophthalic unsaturated polyester resin with moderate reactivity and consumer's required Viscosity.
Orthophthlaic unsaturated polyester Resin - UP 975
UP – 975 is an orthophthalic unsaturated polyester resin with medium viscosity, medium reactivity and mechanical properties. This resin has good UV resistance.
|
Thermoplastic acrylic - POLYACRYL, AC-345AR60
This product is a copolymer of acrylic acid and acrylic and methacrylic acid esters.
Methacrylic resin for cold plastic markings - POLYACRYL, AC-810
Polyacryl AC-810 is a methacrylate resin, used for permanent cold plastic markings. Cold plastic materials based on Polyacryl AC-810 are permanently elastic, weather resistant and resistant to abrasion. It is used in combination with Polyacryl AC-810, which is amine pre activated. Binder contains paraffin which tends to float when stored for a long period of time at lower temperature. Therefore, the binder must be homogenized before use by stirring.
Methacrylic resin for cold plastic markings - POLYACRYL, AC-210
Polyacryl AC-210 is a methacrylate resin, used for permanent cold plastic markings. Cold plastic materials based on Polyacryl AC-210 are permanently elastic, weather resistant and resistant to abrasion. It is used in combination with Polyacryl AC-210, which is amine pre activated. Binder contains paraffin which tends to float when stored for a long period of time at lower temperature. Therefore, the binder must be homogenized before use by stirring.
Hot melt Resin - PI - 720
PI-720 resin is a resin with alkyd nature and 100% solid. This resin to be used with HET -200.
Plasticizer - HET - 200
HET - 200 is a plasticizer and lubricant with alkyd nature and with 100% solid. This plasticizer to be used with PI-720 resin in traffic paints and Hot melt adhesives.
Low Profile Resin - LP-200
LP – 200 is thermoplastic polymer solution in styrene, designed to be used as a low shrink additive.
Low Profile Resin - LP-100
LP – 100 is thermoplastic polymer solution in styrene, designed to be used as a low shrink additive.
Orthophthalic unsaturated polyester Resin - UP-961
UP – 961 is an Orthophthalic unsaturated polyester resin with moderate reactivity and viscosity with extremely flexibility. Also This resin has very low viscosity after curing.
Orthophthalic unsaturated polyester Resin - UP-964
UP – 964 is an Orthophthalic unsaturated polyester resin with moderate reactivity and consumer's required Viscosity.
Orthophthlaic unsaturated polyester Resin - UP 975
UP – 975 is an orthophthalic unsaturated polyester resin with medium viscosity, medium reactivity and mechanical properties. This resin has good UV resistance.
|
Thermoplastic acrylic - POLYACRYL, AC-345AR60
This product is a copolymer of acrylic acid and acrylic and methacrylic acid esters.
Methacrylic resin for cold plastic markings - POLYACRYL, AC-810
Polyacryl AC-810 is a methacrylate resin, used for permanent cold plastic markings. Cold plastic materials based on Polyacryl AC-810 are permanently elastic, weather resistant and resistant to abrasion. It is used in combination with Polyacryl AC-810, which is amine pre activated. Binder contains paraffin which tends to float when stored for a long period of time at lower temperature. Therefore, the binder must be homogenized before use by stirring.
Methacrylic resin for cold plastic markings - POLYACRYL, AC-210
Polyacryl AC-210 is a methacrylate resin, used for permanent cold plastic markings. Cold plastic materials based on Polyacryl AC-210 are permanently elastic, weather resistant and resistant to abrasion. It is used in combination with Polyacryl AC-210, which is amine pre activated. Binder contains paraffin which tends to float when stored for a long period of time at lower temperature. Therefore, the binder must be homogenized before use by stirring.
Hot melt Resin - PI - 720
PI-720 resin is a resin with alkyd nature and 100% solid. This resin to be used with HET -200.
Plasticizer - HET - 200
HET - 200 is a plasticizer and lubricant with alkyd nature and with 100% solid. This plasticizer to be used with PI-720 resin in traffic paints and Hot melt adhesives.
Low Profile Resin - LP-200
LP – 200 is thermoplastic polymer solution in styrene, designed to be used as a low shrink additive.
Low Profile Resin - LP-100
LP – 100 is thermoplastic polymer solution in styrene, designed to be used as a low shrink additive.
Orthophthalic unsaturated polyester Resin - UP-961
UP – 961 is an Orthophthalic unsaturated polyester resin with moderate reactivity and viscosity with extremely flexibility. Also This resin has very low viscosity after curing.
Orthophthalic unsaturated polyester Resin - UP-964
UP – 964 is an Orthophthalic unsaturated polyester resin with moderate reactivity and consumer's required Viscosity.
Orthophthlaic unsaturated polyester Resin - UP 975
UP – 975 is an orthophthalic unsaturated polyester resin with medium viscosity, medium reactivity and mechanical properties. This resin has good UV resistance.
|
Thermoplastic acrylic - POLYACRYL, AC-345AR60
This product is a copolymer of acrylic acid and acrylic and methacrylic acid esters.
Methacrylic resin for cold plastic markings - POLYACRYL, AC-810
Polyacryl AC-810 is a methacrylate resin, used for permanent cold plastic markings. Cold plastic materials based on Polyacryl AC-810 are permanently elastic, weather resistant and resistant to abrasion. It is used in combination with Polyacryl AC-810, which is amine pre activated. Binder contains paraffin which tends to float when stored for a long period of time at lower temperature. Therefore, the binder must be homogenized before use by stirring.
Methacrylic resin for cold plastic markings - POLYACRYL, AC-210
Polyacryl AC-210 is a methacrylate resin, used for permanent cold plastic markings. Cold plastic materials based on Polyacryl AC-210 are permanently elastic, weather resistant and resistant to abrasion. It is used in combination with Polyacryl AC-210, which is amine pre activated. Binder contains paraffin which tends to float when stored for a long period of time at lower temperature. Therefore, the binder must be homogenized before use by stirring.
Hot melt Resin - PI - 720
PI-720 resin is a resin with alkyd nature and 100% solid. This resin to be used with HET -200.
Plasticizer - HET - 200
HET - 200 is a plasticizer and lubricant with alkyd nature and with 100% solid. This plasticizer to be used with PI-720 resin in traffic paints and Hot melt adhesives.
Low Profile Resin - LP-200
LP – 200 is thermoplastic polymer solution in styrene, designed to be used as a low shrink additive.
Low Profile Resin - LP-100
LP – 100 is thermoplastic polymer solution in styrene, designed to be used as a low shrink additive.
Orthophthalic unsaturated polyester Resin - UP-961
UP – 961 is an Orthophthalic unsaturated polyester resin with moderate reactivity and viscosity with extremely flexibility. Also This resin has very low viscosity after curing.
Orthophthalic unsaturated polyester Resin - UP-964
UP – 964 is an Orthophthalic unsaturated polyester resin with moderate reactivity and consumer's required Viscosity.
Orthophthlaic unsaturated polyester Resin - UP 975
UP – 975 is an orthophthalic unsaturated polyester resin with medium viscosity, medium reactivity and mechanical properties. This resin has good UV resistance.
|
Thermoplastic acrylic - POLYACRYL, AC-345AR60
This product is a copolymer of acrylic acid and acrylic and methacrylic acid esters.
Methacrylic resin for cold plastic markings - POLYACRYL, AC-810
Polyacryl AC-810 is a methacrylate resin, used for permanent cold plastic markings. Cold plastic materials based on Polyacryl AC-810 are permanently elastic, weather resistant and resistant to abrasion. It is used in combination with Polyacryl AC-810, which is amine pre activated. Binder contains paraffin which tends to float when stored for a long period of time at lower temperature. Therefore, the binder must be homogenized before use by stirring.
Methacrylic resin for cold plastic markings - POLYACRYL, AC-210
Polyacryl AC-210 is a methacrylate resin, used for permanent cold plastic markings. Cold plastic materials based on Polyacryl AC-210 are permanently elastic, weather resistant and resistant to abrasion. It is used in combination with Polyacryl AC-210, which is amine pre activated. Binder contains paraffin which tends to float when stored for a long period of time at lower temperature. Therefore, the binder must be homogenized before use by stirring.
Hot melt Resin - PI - 720
PI-720 resin is a resin with alkyd nature and 100% solid. This resin to be used with HET -200.
Plasticizer - HET - 200
HET - 200 is a plasticizer and lubricant with alkyd nature and with 100% solid. This plasticizer to be used with PI-720 resin in traffic paints and Hot melt adhesives.
Low Profile Resin - LP-200
LP – 200 is thermoplastic polymer solution in styrene, designed to be used as a low shrink additive.
Low Profile Resin - LP-100
LP – 100 is thermoplastic polymer solution in styrene, designed to be used as a low shrink additive.
Orthophthalic unsaturated polyester Resin - UP-961
UP – 961 is an Orthophthalic unsaturated polyester resin with moderate reactivity and viscosity with extremely flexibility. Also This resin has very low viscosity after curing.
Orthophthalic unsaturated polyester Resin - UP-964
UP – 964 is an Orthophthalic unsaturated polyester resin with moderate reactivity and consumer's required Viscosity.
Orthophthlaic unsaturated polyester Resin - UP 975
UP – 975 is an orthophthalic unsaturated polyester resin with medium viscosity, medium reactivity and mechanical properties. This resin has good UV resistance.
|