Methacrylic resin for cold plastic markings POLYACRYL, AC-210
Product Describtion
Polyacryl AC-210 is a methacrylate resin, used for permanent cold plastic markings. Cold plastic materials based on Polyacryl AC-210 are permanently elastic, weather resistant and resistant to abrasion. It is used in combination with Polyacryl AC-210, which is amine pre activated. Binder contains paraffin which tends to float when stored for a long period of time at lower temperature. Therefore, the binder must be homogenized before use by stirring.
Applications
Ac-210 is recommended for production of two/three component traffic paints (films with up to 3000µ thickness) in mild and hot climate. Marking compounds, based on Polyacryl A-210 are particularly suitable for manual application with smoothing trowels or draw boxes. Cold plastic material usually Applied to asphalt and surfaces in layer thickness of 1,5 – 2,5 mm.
Curing method
While making the paint, add appropriate amount of accelerator (100 unit resin/0.7-1 unit accelerator) to the formulation. Then, prior to application add 1-3% benzoyl peroxide powder (paste) to the paint.
Storage
Keep way from direct sunlight and under 30˚ϲ.
Stability:
under aforementioned conditions:3months from production date.
Note:
To avoid explosion reaction, keep the hardener and the accelerator away from each other.